WARNING:
Failure to observe this warning may cause injury to persons and
damage to power supply or connected equipment.
CAUTION:
Failure to observe this warning may result in damage to equipment
and Improper functioning of the power supply.
WARNING:
1. Do not use this power supply near water.
2. Do not operate or touch this power supply with wet hands.
3. Do not open power supply case when it is connected to AC power source.
4. Refer all servicing to qualified service personnel only.
5. The power supply is designed for in-door use.
6. This power supply is made to charge only properly sized lead acid batteries.
7. Don't recharging non-rechargeable batteries.
8. Charging other types of battery or under-sized lead acid batteries may cause fire
or explosion.
9. Do not use the charger if it has been dropped or damaged.
10. Do not remove casing of the charger, there is no user-serviceable parts inside.
11. Do not charge the battery on boats. Remove the battery and charge on shore.
12. Never attempt to charge a frozen battery
13. Never attempt to charge a damaged battery.
14. Wear protective goggles and turn your face away when connecting
disconnecting the battery.
15. Never place the charger on top of a battery.
16. Never smoke, use an open flame, or create sparks near battery or charger
during normal charging operation as batteries may give out explosive gas.
17. Do not charge batteries in an enclosure due to possible explosion of entrapped
explosive gas.
18. Use of accessory not recommended may cause risk of fire, electric shock.
19. Disconnect the AC supply before connecting or disconnecting the links to the
battery.
20. If the charger does not work properly or if it has been damaged, unplug its AC
and DC connection.
21. During charging, the battery must be placed in a well ventilated area.
22. If longer output charging cord is required make sure the wire gauge is adequate
for the current in given cable length.
INTRODUCTION
Congratulations on purchasing our new Digital Multipurpose Switch Mode Power
Supply.
Compact supply is housed in a lightweight enclosure with integral handle, making it
great for benchtop or field use. Tri-mode operation includes standard power supply
output, battery-charge mode and USB power/charge modes. The unit provides
variable voltage up to 30VDC, with adjustable current limiting to 10A and will
operate at full 300W output for up to eight continuous hours. Fixed 5VDC, 2A output
is provided via front panel USB jack, variable output provided via standard banana
jacks. Separate output ON/OFF control allows settings to be made prior to
energizing the connected device.
CONTROL
AND
INDICATORS
