9
BACKLIGHT
•
Press and hold the
LIGHT
button to turn on or off the LCD backlight.
•
The backlight will automatically switch off after 60 seconds.
AUTO POWER OFF
•
Power will turn off after 5 minutes of idle time.
SELECTION OF SERIAL/PARALLEL MODE
•
A suitable equivalent mode can be selected to gain more precise measurement
data.
•
In general, it is suggested to select serial equivalent mode for low impedance
element, such as less than 100Ω.
•
Select parallel equivalent mode for high impedance element, such as more than
10kΩ.
INDUCTANCE MEASUREMENT
•
Press the power button and then press
FUNC
to
display “Lp” on the LCD.
•
Select inductance measurement range.
•
Insert the inductor into input terminals or connect the
inductor to the meter using the test clamp.
•
Press
FREQ
to select suitable testing frequency.
•
Press “
D/Q/θ
” to select the auxiliary parameter to
measure.
CAPACITANCE MEASUREMENT
•
Capacitors must be completely discharged before
measurement.
•
Press the power button, then press
FUNC
to
display “Cp” on the LCD and select capacitance
measurement range.
•
Insert the capacitor into input terminals or
connect the capacitor to the meter using the test
clamp.
•
Press
FREQ
to select a suitable testing
frequency.
•
Then press “
D/Q/θ
” to select the auxiliary
parameter to measure.