Model 72-10395 Operating Manual
5
Buzzer
Continuity
0.1Ω
About≤60Ω
600V AC
Continuity resistance
≤60Ω: buzzer beeps;
＞
60Ω:
not necessarily to
beep, and displays
approximate resistance value
with unit“
Ω
”
Low
Voltage
Indication
About
＜
2.4V
icon appears
V.
Operations
Check if the LCD screen displays
icon to indicate the battery is low after turning on the
meter. If it does, to ensure measuring accuracy, please replace the battery. You should also
take notice of notes beside
icon. They can remind you of not measuring the voltage
higher than the limit before measurement.
1.
DC voltagemeasurement (See Figure 2)
(1)
Turn the knob to DCV stall, AUTO and DC icons appear on LCD;
(2)
Connect the black test probe to the cathode of the power to be measured and the red
test probe to the anode of the power to be measured;
(3)
Read measuring results displayed on LCD;
(4)
Reverse test probes in measurement, then LCD will display negative readings.
Figure 2 Figure 3
2.
AC voltagemeasurement(See Figure 3)
(1)
Turn the knob to ACV stall, Auto and AC icons appear on LCD;
(2)
Connect the black test probe to the cathode of the power to be measured and the red
test probe to the anode of the power to be measured;
(3)
Read measuring values displayed on LCD;
(4)
Reverse test probes in measurement, then LCD will display negative readings.
Warnings:
Do not input voltage above 600V, you may get desired values, however, it may risk
ofdamaging the internal wiring.
To avoid electric shock, please use it with extreme caution when measuring high
