15
To display all measurement values of Channel A
•
Press [A] to turn on Channel A.
•
Press [SCOPE] to enter the frequently used function
menu.
•
Press [F2] to enter the parameter measurement
options.
•
Press [F1] to select customized parameter for
parameter measurement.
•
All measurement parameters will be shown on screen.
Storage Setups and Screen Copy
•
Press [SAVE] to access the
storage menu.
•
You can save and recall
waveforms and setup documents on the oscilloscope’s internal memory and
any USB device. You can also save and recall waveform documents and setup
documents on a USB device.
Functions Menu
Setup
Notes
Save
Setup
Waveform A
Waveform B
Save the current setups of all menus.
Save the Channel A waveform.
Save the Channel B waveform.
Medium
Internal
USB
Save the setup and waveform documents internally.
Save the waveform document on the USB device.
Position
1~10
Set and select the storage position with the jog dial.
Run
Run the previously selected operation.
Return
Go back to previous menu.
Functions Menu
Setup
Notes
Save
Setup
Reference waveform
Recall a saved setup.
Recall and display a saved waveform.
Source
Internal
USB
Position
1~10
Set and select the storage position with the jog dial.
Run
Run the previously selected operation.
Return
Go back to previous menu.
Screen copy
•
With this function, you can save the display interface on the USB device.
•
Press [A] to turn on Channel A.
•
Insert the USB device into the USB jack.
•
Press and hold the [SAVE] button for 4 to 5 seconds and then release. The
“Saving.......” progress bar will appear. The display interface is successfully saved
on the USB device when that progress bar disappears.
•
You can see the saved USB image on your computer. It is saved in the root
directory of the USB device.
Recall
•
In the storage menu press [F2] to select the recall function:
