www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <3>
V1.0
23/08/18
Operating Instructions
Control Panel Guide
Control Panel Guide
LCD Display
1
. Unpack the unit and check for the contents (please contact Tenma in case any of the contents are missing)
2
. Insert the soldering iron’s plug to the socket on the control panel and tighten the nut on the plug securely. Place the soldering
iron into the soldering iron holder.
3
. Connect the power cord to the control unit and plug into the mains socket. Turn on the power supply and the control unit.
The digital display will show the current set or the last set value of temperature for a few seconds. After a few seconds, it will
display the actual temperature as in diagram 1 and diagram 2 below.
