At any boot mode DIP switch assigned to put the location of Q: The display's backlight to turn
off lights, open the lock button function. (N Slide Switches back position, the screen backlight lights
opened out, key lock feature off, return the original model.)
- Lock,Standby and Record Video
Selection in this mode: Regardless of the machine in any status under the DIP switch assigned to
the location of Q, the faster boot drive (shock oscillation time) and enter the video mode to record
audio and video camera images of the left video lantern light, while the screen backlight to turn
off lights, open the lock button function. (DIP switch back position N, the machine (a vibrator
vibration twice) the left side of the video after the lights went out save by recording just the audio
and video camera data to the screen (playback- video) file folder and then shutdown .
- Lock,Standby and Record Audio
Selection in this mode: Regardless of the machine in any status under the DIP switch assigned to the
location of Q, the faster boot drive (shock oscillation time) and enter the recording mode to record the
microphone to receive all the audio, the left recording pulse of flashing lights. At the same time, the backlight
display lights are switched off, open the lock button function. (DIP switch back position N, the machine (a
vibrator vibration twice) just after the preservation of audio data to recording (playback- audio) file folder and
then shutdown.
- Motion detect
Selection in this mode: no matter which the state it’s in, when you switch to the Q position, the device
will launch up quickly. (Vibrate for once at the same time) And enter video record mode.
Video record mode: Change to motion detection state. Start to record dynamic video and audio. The record
light on the left side will turn on.
Note: In motion detect mode,. There will be a yellow logo M on the upper left corner. It will automatically
record video when any motion detected. 20 seconds after motion stops, the device will stop recording
automatically and save file just then recorded to the archive.
Note
：
can’t connect USB with computer under Q mode at the same time
3. Record Time - settings Record Time
-
5
Minute
- 15
Minute
-
30
Minute
4. Vibrating - set the Vibrating
