6
STORAGE INSTRUCTION
1. Press and hold the
POWER
button for 3 seconds to turn off the unit. Unplug
Power Cord from AC outlet.
2. Thoroughly clean the unit by follow Collection Bin Cleaning Instructions and
HEPA and Air Outlet filter cleaning instructions on page 5.
3. Unplug Power Cord from the back of the unit and store it inside Collection Bin.
Never wrap cord tightly around the unit, bending cord in sharp angles may cause
breakage.
4. Store the Smart Touchless Vac-Can indoors in a clean, dry place. Never store
the unit when it is still plugged in.
WARNING!
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SMART
TOUCHLESS VAC-CAN OUTDOORS OR IN WET SURROUNDINGS.
TROUBLE SHOOTING
Problem
Possible Cause
Possible Solution
Smart Touchless
Vac-Can does not
power on
1.
Not firmly plugged in
2.
Unit is in off status
3.
Collection bin is not in position
4.
No power in wall plug
5.
Blown house fuse or tripped circuit
breaker
6.
Cover is not closed
1.
Plug in firmly
2.
Press POWER button and switch
mode between AUTO and MAN
3.
Reinstall Collection Bin
4.
Check house fuse or circuit breaker
5.
Have a qualified licensed electrician
replace house fuse or reset circuit
breaker
6.
Press the close button
Does not run,
audible beep.
Collection Bin is not in-place or
improperly placed inside the unit
Re-install the Collection Bin correctly
Does not vacuum
1.
Dirt Inlet is blocked
2.
Collection Bin is full
3.
Debris too large for inlet
First power off unit
1.
Clean path of Dirt Inlet
2.
Empty Collection Bin
3.
Clear large debris
Sensors do not
activate
Unit is not on AUTO mode
Press POWER button to cycle to AUTO
mode
Suction is not strong Filters may be dirty
Clean both HEPA and Air Inlet filters
by follow filter cleaning instructions
on page 5
Trashcan Lid won’t
close
1.
Objects are detected
2.
Collection Bin handle is improperly
placed
1.
Remove object
2.
Swing Collection Bin handle to the
other side
