7
LiPo
V.TYPE
3.7V
LiIo
LiPo
LiFe
3.6V
3.7V
3.3V
LiPo/LiIo/LiFe
CHK TIME
10min
USER SET
PROGRAM ->
Press
Enter
then
Dec/Inc
For More Options
Press
Enter
to
Start
Press
Enter
then
Dec/Inc
For More Options
5min
60min
Initial Parameter Setup
Once the desired program is selected, hit the “Enter/Start” button to enter the submenu.
Once in the submenu, you can then hit “Enter/Start” to make the parameter numbers blink, and cycle through
the options using the left (Dec.) and right (Inc.) “Status” keys.
***Please be sure to select the correct type of Lithium battery (refer to table A on Page 11).
Misuse can lead to a fire or explosion***
LiPo/Li-ion/LiFe Check Time
Normally, the charger can determine the cell count of the battery at the beginning of the charge/discharge
process. However, when the battery is significantly discharged, the device may not correctly determine the cell
count. When this happens, set the “check time” to 10 minutes, which should be enough for the device to then
correctly determine the cell count.