Manual LoRaWAN CO
2
stoplicht
8
©
Copyright
2021
Teneo
Sales
BV.
All rights reserved.
All information in this manual Is subject to change without further notice.
+31 (0)543 535 535
Figure 3 and 4 : Mounting wall mounting bracket correctly.
In order to secure the stoplicht, it is important that the wall bracket is fixed in such a way that the hook
points upwards; as also shown in Figure 4.
The stoplicht can then be attached to this. This will look like the one shown below in Figure 5.
Figure 5: Example of CO
2
stoplicht attached to the wall by wall bracket.
It is also possible to equip the wall bracket with an anti-theft protection.
This security can be purchased at an additional cost.
3.3. Usage
The CO
2
stoplicht can be put into operation by plugging the power supply into the wall socket.
Then the stoplicht starts up and immediately starts performing the first CO
2
measurement. It may take a
while (± 20 seconds) for the LEDs to light up.
