(1)
Menu panel
(2)
Battery compartment
There are three connectors located on the rear side of the photocell:
(3)
Antenna connector
(4)
Connector for RFID reader
(5)
Power supply adapter connector
Optical sensor
(6)
and speaker
(7)
are located on the front side of the photocell.
Fastening magnet
(8)
is placed on the bottom of the photocell.
On the top there is an optical signalling LED bulb
(9)
.
4.4.1 Photocell setup via menu panel
4.4.1.1 Switching ON
Press ON/OFF button (button of the left - downwards arrow) for 2 < seconds. After the long press
(press and hold 2s <), you will hear a double beep and LED_power will light up. The photocell is
ready for use now.
Immediately after the ON/OFF button is released, information about a current setting of the
photocell is shown on the LED display for 5 seconds.
8
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(8)
(9)
(9)
