Tendercare Ltd
Tilt and Fold Wheelbase Workshop Manual
Document No. Tilt & Fold Wheelbase workshop
manual v 2
Authority. Quality Controller
Authorised by
J Adams
Page
9 of 16
September 2010
The Fabric parts of the Wheelchair are made from Ambla fabric. Ambla is resistant to most
mild acids, alkalis, drinks and household stains. Clean with a damp soapy cloth and rinse well
with clean water. A soft brush can be used for heavy soiling. Do not use solvents, bleaches,
abrasives, synthetic detergents, wax polishes or aerosol sprays.
6. Maintenance
Should a problem be found when carrying out the regular checks, it should be immediately
reported to the issuing authority or repairer.
6.1 Routine maintenance
The user or their family can easily carry out the following tasks. No tools are required.
1)
Always wipe the wheelbase dry. Never put it away damp.
2)
Check that all four push-handle retaining knobs are in place and are hand tight (daily).
3)
Check brake operation (weekly).
4)
Check operation of Tilt and Fold mechanism (weekly).
5)
Clean frame when necessary (we suggest at least once a week).
6.2 Recommended maintenance procedure - 6 monthly
Someone who is a competent tradesman or repairer should only carry out this work. If a
major problem is found do not allow the wheelbase to be used until it has been corrected.
1)
Fold and open the wheelbase. Check that all movements through the folding range are
free. Examine frame for any damage.
2)
Examine nuts, bolts, pivots, sliders and frame plugs for tightness and general condition.
3)
Examine push handle retaining knobs and check they are hand tight.
4)
Examine footrest heel loops
(If fitted)
for damage or excessive wear and that the retaining
nuts are tight.
5)
Examine brake assemblies for wear, damage and adjustment.
6)
Examine Tilt and Fold mechanism and check operation of reclining mechanism.
7)
Examine front castors and rear wheels for free rotation and security.
7. Repairs
Repairs: - for all repairs contact your issuing Authority or Tendercare Ltd.
Only an authorised repairer should carry out the following repairs.
Major repairs: - for all major repairs e.g. bent or damaged frame. The equipment should be
returned to the factory. Contact Tendercare Ltd Customer Services on telephone 01903-
726161.