Snazzi Sun Hood and Rain Shield Instructions
Page 2 of 6
August 2013
Fig. 4
The hood fits into the frame adaptors, which
are located under the slot in the top of the
seat back cover (see Fig 4, left). Please note
if your hood was ordered after the pushchair,
the sun hood slot will need cutting. Simply cut
through the middle of the slot using a Stanley
knife, being careful not to cut beyond the
stitched button-hole in the cover.
Open up the slot and feed the mounting clip
into the frame adaptor, it may be easier to fit
one side at a time. Push the clip into the
adaptor until it locks in and will no longer pull
out (please note that the padded cover can
offer a bit of resistance, meaning it may be
necessary to push firmly to get the clip to
fully engage).
Fig. 5
Lift the front of the hood up so that it folds flat
and sits in line with the backrest of the
pushchair (see Fig 6, right).
Fig. 6
