300M Wireless AP
17
2.
Security Mode:
Configure the security mode (WPA-PSK is recommended);
3.
Cipher Type:
Select a cipher type according to your need (AES is recommended);
4.
Security Key:
Configure a security key;
5. Click
Save
.
3.3.2 WDS Mode
In this mode, this device can provide access to at most 4 APs. Click
Quick Setup
and select
WDS Mode
to
enter screen below:
Configuration Procedures:
1. Click
Enable Scan
;
2. Select the remote SSID you wish to connect;
3. Configure the security settings, including security mode, cipher type and security key. These settings
should be kept the same as the remote device
’s;
4. Click
Save
.
5. Log in to the remote device
’s Web interface and follow steps 1-4 as shown above to configure the same
settings on it.
When bridged successfully,
Status
displays
“Connected”
next to
the corresponding
MAC Address
field.
Summary of Contents for W301A
Page 1: ...300M Wireless AP 1 ...
