300M Wireless-N Access Point
Basic Data Rates from the drop-down menu. Here,
default value is (1-2-5.5-11Mbps…). It is
recommended not to modify the default value.
Beacon Interval
:
The frequency interval of the
beacon, which is a packet broadcast by an AP to
synchronize a wireless network. The default value
is 100 ms.
Fragment Threshold
:
The fragmentation
threshold defines the maximum transmission
packet size in bytes. The packet will be
fragmented if the arrival is bigger than the
threshold setting. The default size is 2346 bytes.
RTS Threshold
:
RTS stands for “Request to
send”. This parameter controls what size data
packet the frequency protocol issues to RTS
packet. If the device works in SOHO, do not
modify the default value.
TX Power
:
Set the wireless output power level.
The default value is 100.
WMM Capable
:
To enhance wireless multimedia
transfer performance (0n-line video and voice). If
you are not clear about this, enable it.
APSD Capable
:
It is used for auto power-saved
service. The default is disabled.
55