4
2
Installing the Router
2.1
Installation Notes
Follow the notes below to avoid device damages or personal injuries caused by misoperation.
2.1.1
Safety Precautions
Power on the device using the power adapter included with the package.
Make sure that the input voltage matches the value specified on the label of the device.
Make sure that the device is positioned at a place with good ventilation.
Do not remove the housing of the device.
Before cleaning the device, disconnect it from the power supply. Do not scrub the device with any liquid.
Position the device away from powerline, electric lamp, and power system.
2.1.2
Environmental Requirements
Temperature and Humidity
Environment
Temperature
Humidity
Operating
environment
0
℃
~ 40
℃
10%RH - 90%RH
(non-condensing)
Storage
environment
-40
℃
~ 70
℃
5%RH - 90%RH (non-condensing)
Anti-static Precautions
To prevent static interference, keep the air in the ambient environment clean. Regularly perform dedusting. Make
sure that the device is grounded properly.
Lightning Protection
To protect the device against lightning stroke or strong current, do the following:
Make sure that the power receptacle and workbench are grounded properly.
Connect the cables to the device properly to avoid generating internal lightning induction. If outdoor
cabling is required, it is advisable to deploy a signal lightning arrester.
Workbench
Make sure that the workbench is stable and sturdy enough.
Place the device in a well-ventilated environment. Keep at least 10 cm space on all sides for cooling.
Do not place heavy objects on the device.
