35
Parameter
Description
SSID Broadcast
It specifies whether to enable the SSID broadcast.
Enable
: It indicates that the router broadcasts the SSID and the SSID can be
detected by clients.
Disable
: It indicates that the router does not broadcast the SSID and the SSID does
not appear in the available network list. You need to enter the correct SSID and
WiFi password when connecting the client to the wireless network.
SSID
It specifies the WiFi name of the current wireless network of the router (primary
SSID, secondary SSID 1 and secondary SSID 2).
After the router is connected to the internet, the clients can access the internet by
connecting to the SSID. The SSID, which is the WiFi name can be modified.
Code Format
It specifies the encoding format of Chinese characters in the current SSID (WiFi
name). The default code format is UTF-8.
If 2 or more SSIDs of the router are enabled, you are recommended to set this
parameter to
UTF-8
for some SSIDs and to
GB2312
for the other SSIDs, so that any
wireless client can identify one or both SSIDs that contain Chinese characters.
Security
It specifies the encryption type of the wireless network.
None. No security mode is selected.
WPA-PSK:
It is a standard, interoperable and enhanced WLAN security solution,
adopting an encryption algorithm more secure than WEP.
WPA2-PSK: It provides better security than WEP or WAP.
WPA-PSK&WPA2-PSK: Both WPA-PSK and WPA2-PSK are supported.
WiFi Password
It specifies the password of the wireless network. In consideration of network
security, it is strongly recommended to set the WiFi password.
Key Update Interval
It specifies the automatic update interval of a key for data encryption, which results
in higher data security.
Max Connected
Clients
It specifies the maximum number of wireless clients that can connect to the router
with the selected SSID (WiFi name).After this upper limit is reached, the SSID rejects
new connection requests from clients.
Secondary SSID 1/2
The router supports two secondary SSIDs, which are disabled by default.
Configuration steps of the secondary SSIDs are same as those of primary SSID.
6.1.2
Modifying Basic Parameters
Step 1
Choose
Wireless
>
Basic
.
Step 2
SSID: Modify the SSID, namely the WiFi name.
Step 3
Security: Select the security mode from the drop-down menu, such as WPA-PSK&WPA2-PSK, and set the
WiFi password.
Step 4
Click
OK
.
