ON
System is started in normal condition
Note:
How to use the “RESET” button?
If you want to restore to factory default setting, please press the
RESET button when power is off, and then turn on the power, the
system LED will shrink for several times, then please release the
RESET button, after around 5 seconds, the system LED will shrink
for several times again, this means that reset has been finished. Please
turn power off and then restart, then switch will be restored to
factory default setting.
Cautions: Unless you require to delete the current configuration,
please don’t press RESET casually.
2.2 Working Environment Required
¾
Ethernet LAN
¾
Connect the port of TEH1208/1216/1224 to LAN with twisted pair
cable
¾
Web Browser should be Microsoft IE 4.0 or Netscape Navigator 4.0
or above
¾
Operating system supporting Windows, Linux, NetWare etc, and
Summary of Contents for TEH1208
Page 1: ......
