Wireless N150 Long Range AP/Router
34
Ø
DHCP Server:
enable or disable the device’s DHCP server feature. If enabled,
the DHCP server will assign IP addresses to requesting clients
Ø
Start IP Address:
Specify the starting IP address for the DHCP server IP
assignment
Ø
End IP Address:
Specify the ending IP address for the DHCP server IP
assignment
Ø
Primary DNS Server:
Specify a primary DNS address for requesting clients
Ø
Secondary DNS Server:
Specify a secondary DNS address for requesting
clients. This field is optional
Ø
Lease Time:
The length of time for the IP address lease. Configuring a proper
lease time improves the efficiency for the DHCP server to reclaim disused IP
addresses
Ø
For example:
If the lease time is set to one hour, then the DHCP server will
reclaim disused IP addresses every hour
3.5 WAN Medium Type
Here you can select a proper WAN medium type to use: Wireless WAN (WISP) or
Wired WAN to connect to the uplink device. Internet connection types are the same
for the two medium types.
Ø
Wired WAN:
Connect to uplink device via an Ethernet cable
Ø
Wireless WAN:
Connect to uplink device (WISP AP) wirelessly
Please do following the steps as below if you connect to the Internet wirelessly.
1.
Select
Wireless WAN
(
WISP
)
and click Scan
. Currently available wireless
networks will then be displayed.
