Tenda TEG1016D User Manual Download Page 4

 

 

1

Introduction

 

 

The TEG1016D/1024D Gigabit Ethernet Switch, a mini desktop switch, is 

designed to resolve data transfer bottleneck in the enterprises and Internet 

Cafe. It has 16/24 10/100/1000Mbps auto-negotiation Ethernet ports and 

high-speed dynamic memory, supports auto MDI/MDI-X and 

store-and-forward function to make sure the packet to be sent each port 

effectively. “Plug and play” function helps you set up easily. In addition, the 

Gigabit ports can be used as normal ports, as well as Uplink ports to connect 

backbone network. You can replace the 10/100Mbps switch with the 

TEG1016D/1024D to resolve the bottleneck issues of server terminal 

connectivity, because the speed at each port can be up to 2000Mbps for 

full-duplex mode. It’s the best choice for you to upgrade from the normal 

10/100Mbps to 1000Mbps. Moreover, its easy setup and no network 

management will benefit you a lot. So you can import this Gigabit Switch as 

a prime switch to improve the speed between different departments and 

servers.  
 

Switch Features 

 

z

  Compliant to the IEEE802.3, IEEE802.3u, IEEE802.3ab

IEEE802.x 

Ethernet standards, and supports 10/100/1000Mbps transfer mode. 

z

  Supports NWAY auto-negotiation function, auto-detect transfer data rate, 

Summary of Contents for TEG1016D














Reviews: