background image

Step 1: Log in to the web UI

Step 2: Set up a WAN connection

Done.

To access the internet:

Option 2 Access internet over DHCP

Tips:

Local IP Address:
Remote IP Address:
Subnet Mask:

WAN IP Settings:

IP Unnumbered

Request DNS
Primary DNS Server
Secondary DNS Server

Enable            Disable

Type:

PON WAN

This page is used to configure the parameters for PONWAN

Enable VLAN:
VLAN ID:   
802.1p_Mark
Channel Mode: 
Admin Status: 
Connection Type: 
MTU: 
Enable IGMP-Proxy:
Enable MLD-Proxy:
IP Protocol: 

IPoE

nas0_0

INTERNET

 IPv4

1500

Enable

Disable

Fixed IP

DHCP

0

Refer to 

Step 1: Log in to the web UI

 in 

Option 1 Access internet over PPPoE

 under 

Router mode

 

to log in to the web UI of the ONT.

➊ Choose 

WAN

 > 

PON WAN.

➋ Tick 

Enable VLAN

.

➌ Enter the 

VLAN ID

 provided by your ISP.

➍ Set 

Channel Mode

 to 

IPoE.

➎ Set 

Connection Type

 to 

INTERNET.

➏ Click 

Apply Changes.

➐ Click 

OK

 when 

Change setting successfully

 is shown on the page.

•  

Connect your wired device, such as a computer, to a LAN port of the ONT.

•  

Connect your wireless device, such as a smartphone, to the Wi-Fi networks of the ONT, using  

    the 

SSID

 (Wi-Fi name) and 

Key

 (Wi-Fi password) on the bottom label.

•  If you cannot access the internet after the configuration, refer to 

Q2

 in 

FAQ.

•  If you want to change the Wi-Fi name and Wi-Fi password, refer to 

Q6

 in 

FAQ.

Summary of Contents for HG7c











Reviews: