Wireless N301 Easy Setup Router
.
28
connection type.
2.
PPPoE User Name:
Enter the User Name provided by your ISP.
3.
PPPoE Password:
Enter the password provided by your ISP.
4.
MTU:
Maximum Transmission Unit. DO NOT change it from the
factory default value unless necessary.
5.
Service Name:
Description of PPPoE connection. Leave blank
unless otherwise required.
6.
Server Name:
Description of server. Leave blank unless
otherwise required.
7.
Address Mode:
Select "Dynamic" if you don’t get any IP info from
your ISP, otherwise select "Static". Consult your ISP if you are not
clear.
8.
IP Address:
Enter the IP address provided by your ISP. Consult
your ISP if you are not clear.
9.
Subnet mask:
Enter the subnet mask provided by your ISP.
1.3 MAC Clone
Some Internet service providers (ISPs) require end-user’s MAC
address to access their network. This feature copies the MAC
address of your network device to the router.
1.
MAC Address:
Configure device’s WAN MAC address.
2.
Clone MAC Address:
Click to copy your PC's MAC address to the
device as a new WAN MAC address.
3.
Restore Default MAC:
Reset device’s WAN MAC to factory default.
