23
4.2.1 Layer2 Interface
Click
Advanced Setup > Layer2 Interface
to enter the Layer2 Interface screen.
This router provides two kinds of Layer2 Interface:
- ATM Interface
for ADSL broadband Internet service
- ETH Interface
for connecting to the Internet via an Ethernet cable.
By default, system applies the ATM Interface (ADSL uplink).
If you directly connect to the ADSL line via a phone cable, first refer to
and then skip to
To Set up WAN Service for ATM Interface
Or if you connect to the Internet via a fiber/cable modem using an Ethernet cable, first refer to
To Set up WAN Service for ETH Interface
To Set Up the ATM Interface
Select
ATM Interface
and click
Add
.