naviPlay Bluetooth Stereo Kit for iPod:
User Guide
8 of 27
Getting Started With the naviPlay Remote
Figure 2: TEN naviPlay Remote
Recommendation: Please charge the naviPlay Remote for at least 1 hour before first using.
Charging: Connect the DC plug cable (attached to the included AC Power Supply) to the naviPlay
Remote’s DC jack (opposite end from headphone jack). Connect the AC power supply to a standard
electrical outlet. The Charge LED around the DC jack will glow constant red when charging and turn
off once the battery is fully charged.
Attach Headphones or speakers: Connect your headphones, powered speakers or stereo system to
naviPlay Remote’s headphone jack.
Power on: Push the On/Off button once to turn on the naviPlay iPod Adapter. You should see the
Status LED blink.
Power/Play/Paus
e button
Skip
Forwardbutton
Skip
Backward
button
Play/Pause
button
Volume Up
button
Volume Down
button
Charge LED
Status LED
DC
power
socket
Audio
jack
Hold button
Earbuds
