Congratulations of the purchase of your new Pogo Connect Bluetooth Smart stylus!
Pair the stylus with your iPad
Install the AAA battery included in the package. Unscrew the cap from the back of the
stylus, and insert the battery with the positive end Birst.
Press the button on the stylus to start the pairing process. The light will blink for
approximately two minutes, indicating the stylus is connectable.
While the stylus is connectable, open the stylus list view from a compatible iPad
application. Tap the name of the stylus to connect.
After the stylus is fully connected, the light will turn off. You may now use the stylus with
the compatible iPad application.
The compatible application will automatically connect and use the stylus from now on.
Enjoy!
To avoid injury, read all safety information and operating instructions below before using
the Pogo Connect.
Important Safety Information
WARNING: Failure to follow these safety instructions could result in Bire, electric shock, or
other injury or damage.
Medical Devices
If you use any personal medical device, consult the manufacturer of your device or your
physician to determine if it is adequately shielded from external RF energy.
Turn the Pogo Connect off in health care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
Posted Facilities
Turn off the Pogo Connect in any facility where posted notices so require.
Ten One Design
|
149 Chestnut
|
Montclair, NJ USA
|
07042
