Ten-Haaft Premium OYSTER 65, Instructions For Use Manual, Page: 14 / 27

26 27
3. OPERATING THE "OYSTER
®
TV"
When this screen opens, wait until the scanning process has completed. This may take some minutes.
Once the search is completed, the system will determine the target region. If more than one regional channel is
received, press to select the primary region and then press
OK
. Press
EXIT
to exit the menu.
Once the search is completed, the first available digital channel is displayed. All other available channels are
shown in the programme list which you can open by pressing
CHANNEL
.
3. OPERATING THE "OYSTER
®
TV"
To repeat the scan for terrestrial TV stations (option, terrestrial antenna not included in supply), press and hold
the "Auto Tune" (AQT) button. This will delete the existing channel list.
3.4 Channel settings and search (DVB-S / S2)
Select
SOURCE
and switch to satellite TV. Press
SETUP
and use
OK
to select "Channels". Select
OK
and then the sat-
ellite you wish to scan. Check whether the signal and quality display shows any values. Switch to search option
"Transponder" and press
OK
to start the search. The system then scans the entire satellite.