16
3. MENU GUIDANCE
3.2 Settings
These settings can be made at the control panel or via the app.
Settings
Satellite settings
Manual search
Azimuth
Left / right changes the azimuth (in increments of 1°)
Elevation
Left / right changes the elevation (in increments of 1°)
SKEW option
Left / right changes the SKEW angle (in increments of 1°)
Manual Transponder
Frequency
Frequency in MHz
Polarization
High / low
Symbol rate
Symbol rate
FEC-rate
Selection from a list of applicable FEC rates
Modulation type
"QPSK", "QPSK-S2" or "8PSK"
ONID
Network ID
Active
"Yes" or "No". The display shows "Manual mode" when a manual transponder is active.
Receiver Control
"Off", "Automatic" or "OpenSleep" (LNB Off switches the system into sleep mode with the antenna unfolded)
Switch-on delay
Delay until the next check of the LNB voltage for power-up (3 – 90 sec.)
Switch-off delay
Delay until the next check of the LNB voltage for power-down (1 – 30 sec.)
DiSEqC allocation
Mode
Mode
Selection of four presets: „ten Haaft“ (® default), „manual“ (® Sat 1 - 4 ), „NL Canal Digitaal“ and „NL Joyne“ (® two fasctscan presets)
Sat 1 (manual)
DiSEqC position
„Off“ or 0 – 255 (position number of satellite)
Satellite
Name of satellite to be shown for this position
Sat 2 (manual)
...
… as with „Sat 1“
Sat 3 (manual)
...
… as with „Sat 1“
Sat 4 (manual)
...
… as with „Sat 1“
DiSEqC status