7
installation guide
STEP 8
STEP 7
STEP 9
STEP 10
STEP 11
Carefully flip the base over on to its legs. Important: Two people
are required to move the bed base. Do not drag across the floor.
Do not rest frame on its side, excessive pressure may damage
the legs.
Uncoil the remote from the frame and extend from base. Ensure
remote is securely plugged in.
Plug the Power Cord into a power source.
A surge protector is recommended.
Quickly test remote functions to verify proper setup before
placing mattress on base. Return the base to a FLAT position
before placing the mattress on top.
Setup is now complete!
Test all functions on remote.
Slide the left side of the Mattress Retainer Bar into the
bracket. Pull the retainer bar to the opposite bracket and
secure the right side.
For customer support, call Customer Service: 1-800-887-4321
Summary of Contents for Up 2.0
Page 34: ...32 notes ...
Page 35: ...33 notes ...
