.32.
INSTRUCTION MANUAL
Pivot Hinge
Hinge Hole Cap
3.
Remove the Bottom Hinge Cover by prying it off gently with small flat screwdriver. Remove the
Bottom Hinge by unscrewing the Hex Head Screw (4pcs). Unscrew the Pan Head Screw (4pcs)
from bottom left side. Now move the Bottom Hinge to the bottom left side and screw it tightly
with the Hex Head Screws (4pcs). Move the Pan Head Screw (4pcs) to the bottom right side and
screw it.
Bottom
Hinge Cover
Bottom
Hinge Cover
Hex Head
Screw(4pcs)
Hex Head
Screw(4pcs)
Pan Head
Screw(4pcs)
Bottom
Hinge
Hinge
Washer
Hinge Washer
Bottom
Hinge
Pan Head
Screw(4pcs)
4.
Hold the Door carefully with your assistant and place it on the top of Bottom Hinge , make sure
the Pivot Hinge is at correct place through the Hinge Washer. Insert the pin of the Upper Hinge
into the Bushing on the top right and fix it with Hex Head Screw (4pcs). Cover the Upper Hinge
and Bottom Hinge with Upper Hinge Cover and Bottom Hinge Cover. Cover hinge screw holes
on the top right with the Hole Cover.