TOUCH SCREEN PAPERLESS RECORDER
www.tempsendevices.net
Page 2
WHEN YOU RECEIVE THIS INSTRUMENT...
Thank you for purchasing the
TEMPSEN DEVICES, TPLR-120 MULTI COLOR TOUCH SCREEN PAPERLESS
RECORDER.
Please read the instruction manual carefully and use the instrument correctly.
TEMPSEN DEVICES
assumes no liability to any party for any loss or damage, direct or indirect, caused
by the use or any unpredictable defect of the product.
Cleaning of the front panel should be limited to wiping lightly with a dry cloth.
Check that all of the following items are present.
•
Paperless Recorder Range
•
Input Type
•
Output indication
•
Communication interface
•
A pair of mounting bracket
•
Operating Voltage
•
Serial link cable between Recorder& PC Output.
•
PEN DRIVE use after antivirus scanning
INSTALLATION
Installation Location
Install the control panel in a location that meets the following criteria.
(1) Little or no mechanical vibration.
(2) No corrosive gases.
(3) Minimal temperature fluctuations and near normal temperature.
(4) Not directly subject to radiant heat.
(5) Not subject to strong electromagnetic field.
(6) No direct exposure to water.
WIRING
Wiring precautions
While wiring take the following precautions.
(1) Field wiring to the instrument, should be placed so as to avoid blocking the air flow, yet
Provide a suitable service loop to allow easy removal of unit with wiring attached.
(2) Wires should be tied to maintain an order in the event they must be disconnected for
Any reason.
(3) For connecting the wire to the terminals, we recommend use of crimp terminal lugs with
Insulated sleeves.
(4) Route the input circuit wiring away as possible from the power and ground circuits to avoid
Noise pickup.
(5) Use proper-shielded wire to avoid electromagnetic interference.