Tempo Fitness Cable Scout TV90, Operating Manual

Page: 12 / 32

12
Powering Up the TV90
Connect the Cable
Select the connector adapter and/or jumper cable from the TV90 accessory
package that is appropriate.
TV90 Main Display Screen
Press the Power button to turn on the instrument and reach the Main Display.
TV90 Main Display
The instrument powers up with the same settings in place as when it was last
powered off. Press
Setup
or
Test
and the TV90 does the rest.
Press •
Setup
to select the cable type:
The cable type defines the velocity of propagation (Vp) and cable loss
–
values for the test cable. Press
pq
to select the cable type to be tested.
Then press
Exit
to go to Autotest mode.
If your cable type is not listed on the User List, refer to “Coax Cable Vp
–
Table” in the “Reference Guide” section of this manual.
OR
Press •
Test
to use the previous cable setup.
Press •
Language
to choose the menu language:
A list of the available menu languages is displayed. Press
–
pq
to
highlight the language to be used. Press
Use Language
to activate the
chosen language.