6
www.templari.com
1 Introduction
This manual wants to give all the information necessary to the
installation and the correct operation of the heat pump
KITA
Templari® and its startup for its whole life cycle. This document
is divided in chapters, where you can find general information
and operation mode.
1.1 General warnings
•
The choice and the use of the unit to serve the conditioning
system have to be made by a competent staff according
to the current rules in place so to completely satisfy the
requests of the system.
•
The installation, the startup and the maintenance have to
be made by a competent staff able to evaluate the possible
presence of risk factors or malfunction of the machine.
•
The unit is supplied complete with all the options and
functions directly by the manufacturer, every manumission
of the fridge part or of the software isn’t allowed. Possible
manumissions will make expire the operation of the
machine and the responsibility of the manufacturer.
•
Periodic inspections and a correct maintenance of the heat
pump
KITA Templari®, can avoid damages to the unit and
possible costs for the repairs.
•
The warranty expires in case of installation out of
specification.
•
Keep this manual with the necessary schemes in places
easily accessible.
•
In case of malfunction verify the error code on the control
panel, if necessary contact the manufacturer and and ask
original spare parts.
•
On the label of the heating pump
KITA Templari® you can
find all the information according to the current labeling
rules, in particular you can find:
•
Power of the machine in voltage and frequency;
•
Thermal power in heating and cooling regimes;
•
Maximum power;
•
Level of sound power;
•
Refrigeratore used.
1.2 Recommended equipment
•
Star and flat head screwdriver set;
•
Wire cutter;
•
Scissors;
•
Wrenches or pipe wrenches set;
•
Ladder;
•
Hydraulic material for the wires seal;
•
Electrical equipment for links;
•
Protective gloves;
•
Current clamp;
1.3 Description of the series
The series of the heating pump
KITA Templari® shows splitted
hydronic heat machines for the production of heating and
cooling energy and for the production of domestic hot water
with the best technologies in the market.
The heating pump
KITA Templari® is a series of full-inverter
machines having high performance and widely dimensioned
components to favor the efficiency of the machine. Other detail
is the implementation of the technology EVI (Enhanced Vapour
Injection) in the models KITA L, L42 and L66, widing the work
field and the heat pump power. The use of the gas R410A allows
to reach high performances and low environmental impact.
The presence of two electronic valves, inversion valve, pressure
transducers and temperature probes ensure, through the
software integrated as microprocessor in the electronic board,
full functionality and reliability of the machine in the different
regimes of operation. The control of the machine is made by
a remote control permitting to monitor the operation of the
machine and change the temperature set of the water produced
and the operation mode (summer/winter).
Inside unit
Outside unit
Summary of Contents for KITA L33
Page 1: ...AIR WATER version T H E H E A T P U M P Installation and maintenance manual...
Page 5: ......
Page 72: ...72 www templari com...
Page 73: ...73 www templari com...
