- 25 -
The TIC can be inserted into the charging tray either with or without the protective hood.
Once the TIC has been inserted, charging will start automatically.
Once all rechargeable batteries are charged, the system will switch to maintenance mode.
The battery voltage is monitored continuously in this mode, and the battery automatically recharged if
required.
LED display:
A total of 4 rechargeable battery packs at most can be charged at the same time
(2 in the TIC and 2 others outside of it)
GREEN
Supply voltage is pending, no rechargeable battery present or fully charged
RED
Charging
5
MAINTENANCE
The instructions for care, use and maintenance given in this manual must be understood and carefully
followed before the equipment is put into use.
All personnel involved in repair actions must have received appropriate training from the manufacturer.
Clean the camera with water or mild soapy water.
Clean the germanium protective disc with a soft cloth.
Clean the display with a soft cloth.
Keep the camera in a suitable, safe place, e.g., in the carry case or the vehicle charging tray.
NOTE:
Do not use any solvents or acids to clean the camera. Use of such substances may permanently
damage the camera and destroy the body’s properties and the functionality in general.
Do not intentionally submerge the camera too long under water or subject it to high water pressure.
Follow the cleaning instructions of this user's manual. Damage due to contravention are not covered
under the warranty claim.
WARNING
Do not disassemble your thermal imaging camera yourself. In case of a malfunction, the camera needs
to be sent to the manufacturer for inspection immediately. Disassembly causes any warranty claims to
lapse.
The thermal imaging camera is not an independent safety system. Thermal imaging technology is not
a replacement for common fire-fighting measures. It needs to be understood as an accessory that
enables the user to make effective decisions.
User must be trained in: Uses and limitations of technology, its application, interpretation of thermal
images.
Contravention may lead to death and damage health, the equipment and other objects.