Tempest Tacit G4, User Manual

Page: 10 / 47

Tacit G4 User Manual 10
Access Clearance
Observe these minimum access clearances shown around
your enclosure
Mounting Hardware Options
Mounting Bolts

Each Enclosure must be mounted with at least FOUR
points. Larger Enclosures must be mounted with SIX
points.

All mountings must be made using the M12
threaded holes on the top and bottom of the
enclosure.

Use an 8mm hex key to secure the M12 socket cap
screws provided.

Tempest recommends the use of stainless steel
mounting hardware.

IMPORTANT SAFETY NOTICE
Installer must ensure that all mounting points are secure
and conform to local safety regulations. Tempest Lighting
Inc. accepts no responsibility for damage or injury arising
from inappropriate or unsafe installation.
Mounting Options – Unistrut Kit
If mounting positions for the corner bolts are not
convenient, use the Unistrut Kit (55.UR.xxx) to add two
Unistrut rails and Unistrut spring nuts to the top or
bottom of the enclosure.
Using the spring nuts, the enclosure may now be
attached at any point along the Unistrut rails.
8mm
M12-1.75 bolts
Use 8mm hex key
Unistrut Rails may be
mounted above or
below