TemperZone SAT-1 User Operating Instructions Manual Download Page 7

Page 7 

Example:

 

Two sessions of on and off timer per day being set as follow:  

P1 on timer  0800 
P1 off timer   1200 
P2 on timer  1300 
P2 off timer  1700 

If current time is 0730 hrs, it will remain as last state. At 0800 hrs, it will turn on 
the unit using P1 on timer. At 1200 hrs, it will turn off the unit using P1 off timer. 
At 1300 hrs, it will turn on the unit using P2 on timer. At 1700 hrs, it will turn off 
the unit using P2 off timer. 
Pressing on/off  button  to  on/off  the  unit  will  bypass  the  control  of  current event. 
The second event will take over upon expiry of current event.  
Example: If user turns off the unit at 1000 hrs, it will remain off until 1300 hrs, at 
which time control is taken over by timer P2. 

Sleep Activation 

Press 

SLEEP

 button  to  activate  the  sleep  option.  This  option  saves  energy  by 

altering the set temperature over a two hours period. 
Example uses: 
In  Summer,  before  going  to  bed  at  night  with  the  cool  mode  set,  pressing  the  

SLEEP

 button gradually raises the set temperature by 2 degrees to compensate 

for a person’s lower metabolism when sleeping. 

In  Winter,  with  the  heat  mode  set,  pressing  the   

SLEEP

 button  gradually  lower 

the set temperature by 3 degrees to compensate for heavier winter bedding. 
The sleep option is only available for Cool, Heat and Auto modes.

 

Zone Control (option) 

If  your  air  conditioning  installation  has  zones  installed  (i.e. dampers), select  the 
zones  to  be  turned  on  using  the  appropriate  Zone  button.  Zone  1  is  always 
assigned  as  master  zone.  Each  zone  can  be  individually  turned  on  or  off. 
However,  zone  1  can  only  be  turned  off  provided  there  are  two  other  zones 
turned on.  

Key Lock 

This feature protects the control being tampered with by children or unauthorized 
persons. 

To  activate,  hold  down   

TIME

 and 

M O D E

 buttons  for  3  seconds,  key  lock 

symbol

 will light up.  

When the key lock is active, 

a) 

 button can be used to on or off the system. 

b) 

 or 

  button can be used to program the Bypass timer (refer below). 

c) 

CANCEL

 can be used to cancel the Bypass timer. 

d)  Other buttons are ignored. 

Summary of Contents for SAT-1














Reviews: