13
www.grupotemper.com
KDP21-PLUS
Infrared Motion Sensor
Welcome to use KDP21-PLUS infrared motion sensor!
The product adopts good sensitivity detector and integrated circuit. It gathers automatism,
convenience, safety, saving-energy and practical functions. It utilizes the infrared energy
from human as control-signal source and it can start the load at once when one enters
detection field. It can identify day and night automatically. It is easy to install and used widely.
SPECIFICATION
Power Source: 220-240V/AC
Detection Range: 360°
Power Frequency: 50Hz
Detection Distance: 12m max(<24
℃
)
Ambient Light: <3-2000LUX (adjustable)
Working Temperature: -20~+40
℃
Time Delay: Min.10sec±3sec
Working Humidity: <93%RH
Max.15min±2min
Power Consumption: approx 0.5W
Rated Load: Max.1200W
Installation Height: 2.2-4m
300W
Detection Moving Speed: 0.6-1.5m/s
FUNCTION:
--
Can identify day and night: The consumer can adjust working state in different ambient
light. It can work in the daytime and at night when it is adjusted on the “sun” position (max).
It can work in the ambient light less than 3LUX when it is adjusted on the “3” position (min).
As for the adjustment pattern, please refer to the testing pattern.
--
Time-Delay is added continually: When it receives the second induction signals within the
first induction, it will restart to time from the moment.
Good sensitivity Poor sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the following situations:
--
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
--
Avoid mounting the detector near heat sources, such as heating vents, air conditioning units,
light etc.
--
Avoid pointing the detector towards objects that may move in the wind, such as curtains,
tall plants etc.
