Tempcube TC-3200 Lite, Instruction Manual, Page: 7 / 29

12 13
5. Basic Operation
1. When you turn on Main S/W, System loading will run for 10 seconds.
2. After the loading, initialization of basic system will run for 10 seconds.
3. After the initialization, it will turn to the Main page and Basic running
will be Stop Status.
4. You can use the controller from now on.
5. When you click Text Button, it will turn to the Text Screen.
6. Turn to the System to the start status by clicking [Start/Stop] Button.
7. When you click [Set up] button, you can fix several settings for the
Zone.
6. Function of protection
1. Ground fault function
It automatically detects short between a heater and frame ground and
stops output and protects heater, after turning the power on.
2. T/C open function
If there occurs T/C open, short-circuit or reverse connection, this func-
tion prevents from overheat in mold by stopping output.
3. Protective over current function:
It is a function that is able to stop output and protect heater malfunc-
tion when being heater short or over current.
4. Soft-start
When power on, it will be running in [soft-mode] and protect heater
malfunction from moisture by working slowly.
5. Setting Current-high and low function:
It is a function which is for detecting heater short or open. It protects
heater by stopping output when it detects current because it occurs dif-
ferent setting value.
① Main page:
Main page can be moved to 4 kinds of View Display,
Setting Display, Report Display and Guide Display,
1) Text Display
2) Graph Display
3) Digital Display
4) Detail Display
5) Basic Setting Display
6) Report Display
7) Memo Display
8) Mold File Display
9) System Setup Display
10) System information Display
7. Structure of display
7.1. Basic display
7.1.1. Main display
①
② ③
④
⑤
⑥
⑦
⑩
⑨
⑧
① Main page
② Main Menu