P a g e
|
3
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
QUALIFIELD PERSONNEL
Certain tasks must be carried out on the machine by a professional qualified personnel. Not
third parties neither the children should be near the machine working area.
PLANNING ANG SET-UP
Planning, transportation, installation, programming, start-up, maintenance, repairs and other
works must be done by qualified personnel. Authorized technician must check it also.
The following matters must be noted:
-
Technical data and details concerning the permissible use of the machine and its
accessories.
-
General and specific local preparation and safety measures.
-
Personal usage and the use of general safety equipment must be related the norms.
-
Especially listed on this manual guide but specifically not listed in the operating instructions
that has been explicitly forbidden. Such as a handicapped to use the machine is such
cases it is necessary to contact the manufacturing company.
OPERATIONS
Dangers hidden in disregards of safety regulations.
SAFETY DEVICES
The machine is equipped with the safety devices corresponding to current state of the art. In the
matter of safety equipment, the machine may not be disabled, removed, dismantled, damaged.
It applies in particular to:
-
Finger protection glass
AREAS OF USAGE
The Cutting machine of Temelsan MAKASMN is used for any kind of steel bands and band saw
blades or bi-metal or carbide tipped band saw blades.
The cutting capacity for Band Saw Blades is from minimum 6x0.65mm up to a maximum 100
x1.60mm. The machine is capable to cut all kinds of band saw blades which are called
carbon, wood, bi-metal, CT Work.
The machine need to be assembled on the desk.
The machine can be set-
up by the customer’s own staff if officially approved by Temelsan.
Please read the following sections thoroughly and carefully before the initial start-up and ensure
that you clearly understand it.
MAINTENANCE
In order to insure a safe operation on the machine and prevent accidents, the job listed in the
section “Servicing” must be carried out regularly. If the owner of machine is not in a position to
do that also must be arranged by an authorized service agent.
