Occupancy Sensor Switch
- 2 -
Adjustment
1. After connecting the switch, the RZ021 default time-delay is 1min,ambient light sensor
value:25Lux, the switch is in Occupancy sensor mode, when sensor detects motion, the green indi-
cator will flash
2.Short press the big button, can turn on/off the load temporarily, when the time delay expires, the
sensor will turn to the last operating mode.
3. Short press the small button, can turn on/off the load. The switch will enter into ON/OFF mode,
at this mode, the switch works as a normal on/off switch and won’t turn load on/off by motion de-
tection.when motion detected,the red indicator LED will flash to indicate that the switch is in ON/
OFF mode, until user press the big button to escape the ON/OFF mode.
4. Press and hold the big button for more than 4 seconds,can change the time-delay, the red indi-
cator will flash
Flash 1 time --- 15seconds
Flash 2 times --- 1min
Flash 3 times --- 3mins
Flash 4 times --- 5mins
5.Press and hold the small button for more than 4 seconds can change the mode: the red indicator
will flash:
Flash 1 time --- Vacancy mode
Flash 2 times --- Occupancy mode
Flash 3 times --- Occupancy mode without light sensor mode
6. Press the big button and small button at the same time, can change the sensitivity, light sensor
value, and restore to factory settings, the red and green indicator will flash at the same time.
Flash for 1 time --- Low sensitivity
Flash for 2 times --- High sensitivity
Flash for 3 times --- Light sensor value 15Lux
Flash for 4 times --- Light sensor value 25Lux
Flash for 5 times --- Light sensor value 35Lux
Flash for 6 times --- Restore to factory settings
