Maintaining the PTC-960RL
10
Operating conditions
The PTC-960RL should not be used in excessively
dirty or moist environments. It can be operated at
temperatures between 0 and 120 degrees F (-18 and
49 degrees C).
Handling the PTC-960RL
The following information will help to ensure you
receive safe, reliable, and trouble-free service from
your PTC-960RL.
•
Do not stare into the laser beam.
•
Do not point the scanner at anyone’s eyes. You
could cause permanent eye damage.
•
Do not open the PTC’s case. Only a trained
technician may service the parts inside the PTC.
•
If you store a PTC-960RL containing a nickel-
cadmium battery pack in below-freezing
temperatures for more than 1 hour, do not charge
the battery pack until it warms up to room
temperature. Charging cold battery packs can
damage them.
•
Make sure the PTC is off before you connect or
remove any cables or accessories or replace the
battery.
•
Make sure all accessories connected by cable are
connected correctly and the correct cables are used.
•
Use only Telxon-approved batteries and
accessories. Do not attempt to connect any
electrical device that is not part of your PTC-960RL
system to the PTC.
28
