CALL FUNCTIONS
Making Calls
1. Pick up the handset or
Press
the
SPEAKERPHONE
key. The SX5 is now “off-hook.”
2. Listen for dial tone.
3. Dial the phone number. The dialed number will be displayed. The name will also be displayed
if it is stored in the phonebook.
Correct Dialing Errors
• To erase one digit,
Press
the
CLR
key once.
• To erase all digits,
Press
and hold down the
CLR
key until all digits are erased.
Redial the Last Telephone Number Dialed
1. Pick up the handset or
Press
the
SPEAKERPHONE
key. The SX5 is now “off-hook.”
2.
Press
the
REDIAL
key.
Receiving Calls
When there is an incoming call, the SX5 rings, an incoming call notification displays the call type
and Caller ID information (if available), and the LED blinks.
1. Pick up the handset or press the
SPEAKERPHONE
key. Press
CLR
to send the call directly
to voicemail.
2. Begin talking.
Receive a Call When Caller ID is Activated
The Caller ID feature displays the caller’s number when the SX5 rings. If the caller’s name and
number are stored together in the SX5 phonebook, the caller’s name and number will be dis-
played. Contact your service provider to activate this feature.
NOTE:
If there are missed calls (calls not answered), “
MISSED CALLS
” will be displayed with
the number of calls missed. See the
Call Logs
section of this manual for more information.
Ending Calls
Hang up the phone by either placing the handset back onto the SX5 cradle or press the
SPEAKERPHONE
key if using the speakerphone.
In-Call Functions
Mute a Call
1. While in a call, press the
MUTE
key. A notification will display in the upper right corner of the
LCD screen.
2. Press the
MUTE
key again to un-mute the microphone.
Adjust Volume
1. While in a call, press the
Volume
keys to raise or lower the handset/speakerphone volume.
Call Waiting
The
FLASH
key is used to answer call waiting and to switch between calls. Contact your serv-
ice provider regarding the availability of the call waiting feature.
3-Way Calling
Contact your service provider regarding the availability of 3-way calling.
To perform a 3-way call:
1. Make the first call and wait until it connects.
2. After the first call is connected, dial the second number.
3. Press the
FLASH
key. This connects the second call and puts the first call on hold.
4. Wait for the second call to connect.
5. After you are connected to the second call,
Press
FLASH
, which then connects the first
call and completes the 3-way call.
Phonecell
®
SX5 CDMA
9
User Manual