7
C O N F I G U R A T I O N B Y M E A N S O F A P E R S O N A L C O M P U T E R
In order to configure the device using a personal computer you should:
•
Install
Remote Switch Configurator
•
Connect
VRT012
to a PC using a configuratin cable
•
Start
Remote Switch Configurator
In picture 4. you can see the main window of
Remote Switch Configurator
. It is divided
into 3 sections
Picture 4. The main window of
Remote Switch Configurator
Configuration of relay allows choosing a way how the device will switch from ON to OFF
mode of the inner relay.
Device can switch modes automatically after a number of ms, which can be entered in
Relay Timeout (ms) field.
If an external source of a signal (button or other sensor) will be required in order to
switch the modes, you should place a tick at
Enable External Disconnection
.
You can add up to 500 numbers in the list of numbers.
Configuration of relay
Control buttons
The list of numbers
i
Note
: you should add „+“ sign in front of every number.
