6
VoiceUSB
Service menu
VoiceUSB
device parameters can be changed using ordinary telephone connected to
VoiceUSB
device through a standard RJ11 connector named
PHONE
(see chapter 5.3.1.1. ). When the device is
turned on, wait until it sets for work. If required enter PIN code of the SIM card. After a long beep,
enter
Service menu
password. Standard password is ##1111#. When password is entered
VoiceUSB
controlling through the phone is activated and user directly accesses
VoiceUSB
main
Service menu
. Exit
from any part of the
Service menu
by hanging up the phone or dialing **. While navigating in
Service menu
,
long beeps are heard on the line. When any function is being activated, short beeps are heard on the
line.
Service menu
command list of the device is shown in the table.
Command
Description
1#
Device operating mode control
2#
Country selection
3#
USB connection mode
4#
Number dial interval
5#
Service menu
password changing
6#
PIN code entry control
7#
Caller ID display control
8#
Number prefix
9#
Polarity reversal
10#
Minute notification on/off
11#
DTMF sensitivity in
Extension
mode
12#
Prefix blocking
13#
Numbers blocking
14#
Allowed numbers
99#
Restoring default settings
Service menu
parameters are divided into
!
General parameters,
!
Security parameters,
!
Trunk
mode parameters,
!
Extension
mode parameters,
!
Numbers and prefixes blocking.
General parameters
Security parameters
Trunk
mode parameters
Extension
mode parameters
Numbers and prefixes
blocking
