14
3. Select “User Control Module” in the main
window of “Nokia12Configurator”. “User
Control Module” window will show up;
4. Press “Re
(option) “Ini
ad parameters” button on the sheet
tialize” in the opened window. Once
cation name (f.e. “opa”)
tification name has been entered press
t
button;
6. In “User Control Mode” window, in
“Aliasing” section you can create a name of a
rebooting command (f.e. “Turn on 1” and
ite parameters” button;
7. In order to ensure the functionality of a
rebooting program it is necessary to connect a
Motherboard “Reset” cable to the “T-
ModemPCI” modem. For that purpose a special
cable is needed. Connecting of the cable is shown
in the picture bellow;
this has been done, in the “Message Identifier”
field “Identifier” identifi
will show up. You can change this identification
name while clicking on “Change” button. Once a
new iden
“Write parameters” button;
5. Select “Security” option (sheet) in the “User
Control Module” dialog box. Then press “Read
parameters” button. Enter a password in the
“Authentication” section in “Password” field (f.
e. “opa”). Repeat the password in the “Confirm
password” field. Press “Write parame ers”
“Turn off 1”). Program used for rebooting are:
“UOTPUT_SET 6 ON”, “UOTPUT_SET 6 OFF” or
7 OFF”. Once the names have been created, press “Wr
“UOTPUT_SET 7 ON”, “UOTPUT_SET
