Teltonika TFT100, Quick Manual

Page: 11 / 13

11
TFT100 | Wiki
Power
Input voltage range 10-97 V DC with overvoltage protection
Back-up battery 1800 mAh Li-ion battery 3.7 V
Power consumption
350 mA max @ 10 V
Interface
Digital Input 4
Analog Input 2
Digital Output 2
1-Wire Data 1
1-Wire Power 1
RS485 (A-B) ( RS485 modification ) +
RS232 (IN-OUT) ( RS232 modification ) +
UART (RX-TX) ( UART modification ) +
CAN (CAN H – CAN L) ( CAN modification ) +
GNSS antenna Internal High Gain
GSM antenna Internal High Gain
USB 2.0 Micro-USB
LED indication 2 status LED lights
SIM Micro-SIM
Memory 128MB internal flash memory
Physical specification
Dimensions 72,5 x 73 x 27,3 mm (L x W x H)
Weight 205 g
Operating environment
Operating temperature (without
battery)
TBD
Storage temperature (without battery)
TBD
Operating humidity
TBD
Ingress Protection Rating
IP67
Features
Sensors Accelerometer
Scenarios
Eco/Green Driving, Over Speeding,
Jamming,
Excessive Idling , Towing
detection , Crash detection , Auto
Geofence, Trip, Immobilizer, iButton,
DOUT control via call
Sleep modes
GPS Sleep , Online Deep Sleep , Deep
Sleep , Ultra Deep Sleep
Configuration and firmware update
FOTA Web , FOTA , Teltonika
Configurator (USB)
SMS
Configuration, Events, DOUT control,
Debug
GPRS commands Configuration, DOUT control, Debug
Time Synchronization
GPS, NITZ, NTP
Electrical characteristics
Table 6 Electrical characteristics
Characteristic description
Value
Min. Typ. Max. Unit
Supply Voltage
Supply Voltage (Recommended Operating
Conditions)
+10 +97 V