Teltonika TAT100, First Start-Up Quick Start Manual

Page: 4 / 16

Saltoniškių g. 9B-1,
LT-08105 Vilnius Tel. +370 5 212 7472
Faks. +370 5 276 1380 www.teltonika-iot-group.com
info@teltonika.lt
2. Turn on your device by ipping the switch to ON .
3. Connect device to computer using Micro-USB cable . You will need to install USB drivers, see “How to install USB drivers (Windows)” shown
below.
4. You are now ready to use the device on your computer.
How to install USB drivers (Windows)
1. Please download COM port drivers from here (https://teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip) .
2. Extract and run TeltonikaCOMDriver.exe .
3. Click Next in driver installation window.
4. In the following window click Install button. Setup will continue installing the driver and eventually the con rmation window will appear. Click
Finish to complete the setup.
Con guration (Windows)
At rst the device will have default factory settings unless you order pre-con gured device. These settings should be changed according to the
user's needs.
Main con guration can be performed via Teltonika Con gurator software. Con gurator operates on Microsoft Windows OS and uses
prerequisite MS .NET Framework. Make sure you have the correct version installed.