5
This automatic two pole protective device disconnects all the associated equipment (fig 1).
To disconnect the device plug off the AC-DC power adapter from the wall outlet or power strip.
The gap between contacts should be no less than 3mm.
1 Figure:
Building installation scheme
Device service
Signal level of the device depends on the working environment. In case the device starts working
insufficiently, please refer to qualified personnel in order to repair this product.
There are no exchangeable parts within the device including 2A quick acting fuse.
Device should be serviced only by qualified personel. Opening the device will void the warranty for
this product. We recommend forward it to a repair center or to the manufacturer.
Labels with product information (serial number and MAC address) can be found on the bottom
side of the device as well as on the packaging.
