Teltonika © 2011, 3G Wireless Router RUT600 Quick Start Guide v1.02
How to Login to the Router
This section mainly presents how to enter the Router’s Web page. After you have
finished the hardware installation, the following steps will assist you to set the network
configuration for your computer.
How to Set the Network Configuration:
a)
Go to Windows Start, select Control Panel and open Network Connections.
b)
Use right mouse button for “Local Area Network Connection” and select “Properties”.
c)
Select “Internet Protocol (TCP/IP)” and
open “Properties”.
d)
Select “Obtain an IP address
automatically” or select “Use the following IP
address”.
► “Obtain an IP address automatically”
► “Use the following IP address”
IP Address: 192.168.0.XXX: (XXX is a
number from 2~254)
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS Server: Certainly you need to input
the DNS server address provided by your ISP.
Otherwise, you can use the Router’s default
gateway as the DNS proxy server. Click “OK” to
save the configurations. If you are not sure of the
DNS server address, we recommend you to
select “Obtain an IP address automatically” and
“Obtain a DNS server address automatically”.
Login to the Router
a)
To access the Router’s Web-interface, launch a web browser such as Internet
Explorer and enter the Router’s default IP address, http://192.168.0.1. Press “Enter”.
b)
Enter “admin” in both User Name and Password. Click “OK”.
c)
If you have entered the correct user name and password, you will see Router's Web
page.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
