2
3
Front Panel
Back Panel
1
Power socket
1
GSM main antenna connector
2,3,4
LAN Ethernet ports
2
Wi-Fi antenna connector
5
WAN Ethernet port
3
GSM auxiliary antenna connector *
6
Power LED
4
Reset button
7,8,9
LAN LEDs
5
GSM LED
10
WAN LED
*- Unavailable in alternate model.
Hardware installation
1.
Remove back panel and insert SIM card which was given by your ISP (Internet Service
Provider). Correct SIM card orientation is shown in the picture.
2.
Attach GSM main and Wi-Fi antennas.
3.
Connect the power adapter to the socket on the front panel of the device. Then plug
the other end of the power adapter into a wall outlet or power strip.
4.
Connect to the device wirelessly (SSID:
Teltonika
) or use Ethernet cable and plug it
into any LAN Ethernet port.
Configure your computer
1.
Enable the wireless network connection. (Go to
Start
>
Control Panel
>
Network and
Internet > Network and Sharing Center
. In the left pane click
Change adapter settings
link. Right click on
Wireless Network Connection
and select
Enable.
2.
Setup wireless network adapter on your
computer (Right click on
Wireless Network
Connection
select,
choose
Internet
Protocol Version 4 (TCP/IP)
and click
Properties)
3.
Select
Obtain IP address automatically
and
Obtain
DNS
server
address
automatically
if they are not selected.
Click
OK
.
4.
Right
click
on
Wireless
Network
Connection
and
select
Connect/Disconnect
to see available
wireless networks.
5.
Choose the wireless network
Teltonika
from the list and press
Connect
.
