67
Important notes:
Leaving “Keep settings” check box unselected before upgrade process will change IP address of
router to default value 192.168.1.1 and you may need to configure router again (please read
chapter “Logging in” at page 9)
Warning: Do not ever remove router power supply and do not press reset button during upgrade process! This will
totally damage your router and it won’t be accessible. If you have any problems related to firmware upgrade you should
always consult with local dealer.
Reboot
Reboot router by pressing button “Reboot”.
Logout
Log out from router management WEB interface.
Glossary:
WAN – Wide Area Network is a telecommunication network that covers a broad area (i.e., any network that links across
metropolitan, regional, or national boundaries). Here we use the term WAN to mean the external network that the
router uses to reach the internet.
LAN – A local area network (LAN) is a computer network that interconnects computers in a limited area such as a home,
school, computer laboratory, or office building.
DHCP – The Dynamic Host Configuration Protocol (DHCP) is a network configuration protocol for hosts on Internet
Protocol (IP) networks. Computers that are connected to IP networks must be configured before they can communicate
with other hosts. The most essential information needed is an IP address, and a default route and routing prefix. DHCP
eliminates the manual task by a network administrator. It also provides a central database of devices that are connected
to the network and eliminates duplicate resource assignments.
ETHERNET CABLE – Refers to the CAT5 UTP cable with an RJ-45 connector. In other words: the most common internet
cable ever.
AP – Access point. An access point is any device that provides wireless connectivity for wireless clients. In this case,
when you enable Wi-Fi on your router, your router becomes an access point.
