31
Note: Please do not set Data Send Number to some cell phone number,
becaues it will not understand binary SMS. When sending a binary SMS to a
phone number, which is a server phone number, the server can interpret and
understand binary code, so the data can be read and you can view it on the
server.
SMS login and password and authorized number list are used to protect
FMB900 module from unauthorized access. Module accepts messages only
from a list of authorized numbers and with proper module login and password.
Numbers must be without “+” or “00” prefix. If no authorized numbers are
entered, module accepts messages from all numbers.
5.6
GSM settings, Operator list
Operators list – FMB900 can work in different modes (use different settings) according to
the operator list defined. Operator list is used for Data Acquisition Mode switching (see chapter
5.7 Data Acquisition Mode settings for more details). Modes are changed based on GSM
operator FMB900 is connected to.
Figure 15 Operator list configuration
If operator list is left empty, it will allow using GPRS to any GSM operator. Please note that
FMB900 will work in
Unknown mode only
(make sure it is configured to allow data sending –
GPRS context is enabled).
5.7
Data Acquisition Mode settings
Data Acquisition Modes are an essential part of FMB900 device, it is also highly
configurable.
